Product Description:
The RJ-9210 is designed for traction and compression. Designed to measure load limits in metal structural deformed beams (steel girders) or in elevation systems such as elevators or freight elevators. Wherein, the change of the deformation of the beam structure measured by the sensor is transmitted through the load change of the load inlet or outlet in the cabin.
Features:
- Capacity: 60 Kg
- Elastomer for aluminum alloy material
- Easy to install and suitable for any type of beam
- load limitation on metallic structures, elevation systems
Dimensions:
Technical Parameters:
| Parameters | Unit | Value |
| Capacity | Kg | 60 |
| Sensitivity | mV/V | 2.0±0.2 |
| Accuracy | | ≤±0.05 |
| Creep(15min) | %FS | ≤±0.02 |
| Input Resistance | Ω | 350±10 |
| Output Resistance | Ω | 350±10 |
| Insulation Resistance | M Ω | ≥5000(100VDC) |
| Zero Balance | %FS | ≤±1 |
| Temperature Effects on Span | %FS/10℃ | ≤0.02 |
| Temperature Effect on Zero | %FS/10℃ | ≤0.02 |
| Rated Temperature Range | ℃ | -10～+60 |
| Operating Temperature Range | ℃ | -20～+80 |
| Proposed Excitation Voltage | V | 6～12 |
| Allowed Excitation Voltage | V | 18 |
| Safe Overload | %FS | 120 |
| Ultimate Overload | %FS | 150 |
| Protection | | IP65 |
| Cable specification | mm | Ф4 |
| Cable length | m | 2.5 |
| Material | | Alloy Steel |
Applications:
The RJ-9210 is easy to install on clear sections of load beam structures. This load weighing system can be used in finished elevator construction installations, allowing easy integration of load limiters into elevators or freight elevators.
Packing and Shipping:
Packaging and Shipping for Strain Gauge Load Cell:
- All strain gauge load cells are packaged individually in hard cardboard boxes with bubble wrap.
- The package is then placed into a larger cardboard box and secured with bubble wrap.
- The load cells are then shipped with a trusted courier.
